Week 6 Discussion 3 Answer Two Following Questions 1 Important Security Leaders Understand Q43859054
WEEK 6 DISCUSSION 3
ANSWER TWO OF THE FOLLOWING QUESTIONS:
1: Why is it important for security leaders to understand theirorganization’s budgeting and financial processes?
2: How does security deter and detect internal fraud in anorganization?
3: The goals of all corporations are profits. How does asecurity work with this fact given that it’s usually a costcenter?
Expert Answer
Answer to WEEK 6 DISCUSSION 3 ANSWER TWO OF THE FOLLOWING QUESTIONS: 1: Why is it important for security leaders to understand the…
Week 7 Discussion 1 Answer Two Following Questions 1 Security Really Outsourced 2 Rfp Impo Q43859186
WEEK 7 DISCUSSION 1
ANSWER TWO OF THE FOLLOWING QUESTIONS BELOW:
1: Can security really be outsourced? Why or why not?
2: What is an RFP? Why is this an important concept in thesecurity field?
3: What is the significance of possible collusion betweenemployees and security personnel?
Expert Answer
Answer to WEEK 7 DISCUSSION 1 ANSWER TWO OF THE FOLLOWING QUESTIONS BELOW: 1: Can security really be outsourced? Why or why not? 2…
Week 7 Discussion 2 Answer Two Following Questions 1 Many Security Directors Feel Measure Q43859189
WEEK 7 DISCUSSION 2
ANSWER TWO OF THE FOLLOWING QUESTIONS BELOW:
1: What do many security directors feel is a measure thatcombats collusion?
2: How important is making people feel safe in securityprograms?
3: Outline the critical differences between criminal law andcivil or contract law.
Expert Answer
Answer to WEEK 7 DISCUSSION 2 ANSWER TWO OF THE FOLLOWING QUESTIONS BELOW: 1: What do many security directors feel is a measure th…
Week 7 Discussion 3 Answer Two Following Questions 1 Name Differences Contracting Security Q43859283
WEEK 7 DISCUSSION 3
ANSWER ANY TWO OF THE FOLLOWING QUESTIONS BELOW:
1: Name differences between contracting security services forsmall programs versus large programs.
2: Discuss some of a security officers main obligations. Nameone or two unreasonable risks that security officers should not beexpected to take.
3: Research best practices and laws regarding the arming ofguards as a part of security services.
4: What can management do if they realize their contractsecurity service isn’t performing well?
Expert Answer
Answer to WEEK 7 DISCUSSION 3 ANSWER ANY TWO OF THE FOLLOWING QUESTIONS BELOW: 1: Name differences between contracting security se…
Week 7 Discussion Answer Two Following Questions 1 Significance Possible Collusion Employe Q43908262
WEEK 7 DISCUSSION
ANSWER ANY TWO OF THE FOLLOWING QUESTIONS BELOW:
1: What is the significance of possible collusion betweenemployees and security personnel?
2: How important is making people feel safe in securityprograms?
3: Discuss some of a security officer’s main obligations. Name oneor two unreasonable risks that security officers should not beexpected to take.
Expert Answer
Answer to WEEK 7 DISCUSSION ANSWER ANY TWO OF THE FOLLOWING QUESTIONS BELOW: 1: What is the significance of possible collusion bet…
Week 7 Written Assignments Written Assignment Discuss Following Five Pages 1 Compare Contr Q43859281
Week 7 Written Assignments
For this written assignment, discuss the following in fivepages.
1: Compare and contrast proprietary security and contractsecurity services. What are the similarities? What are thedifferences?
2: Include discussions on outsourcing both physical and cybersecurity.
3: In your mind, which is best? Fully explain why.
Expert Answer
Answer to Week 7 Written Assignments For this written assignment, discuss the following in five pages. 1: Compare and contrast pro…
Week Examine Wireshark Well Used Network Packet Analyzer Discussion Define Packet Analyzer Q43788735
This week you will examine WireShark, a well-used network-packetanalyzer. For this discussion:
Define a packet analyzer and describe its use
List commonly used packet analyzers (beyond WireShark)
List best practices for analyzing packets
Describe uses (good and bad, ie. hacker) of a packetanalyzer
Discuss ways you would protect your own network data from beinganalyzed
Ideally, attach a screen shot showing and discussing ananalyzer’s use.
Expert Answer
Answer to This week you will examine WireShark, a well-used network-packet analyzer. For this discussion: Define a packet analyzer…
Week Re Going Add Hardware Device Vcloud Make Device Ready Use Ve Posted Directions Lab Pl Q43783665
This week, we’re going to add a hardware device to vCloud, then make that device ready for use. I’ve posted directions for doing this in the lab, but please note that the actual commands should be composed based on the information here. Don’t blindly cut/paste from the instructions or you will end up with the wrong settings. 1. Create a new disk drive in vCloud with a capacity of 16GB. Please do not make it any larger. If you’ve already done this for the lab, you can use this disk in vcloud (/dev/sdb) and can skip ahead to step 2. For this part you should follow the lab instructions exactly. If you are unsure of what to do here, please contact me and I’ll assist you. 2. Boot your CentOS instance. From a root account, use the ‘fdisk -l command to find your new partition. It should be named /dev/sdb. If this is not correct, please contact me. 3. Using the fdisk utility, partition your NEW disk (make sure you don’t over write your existing (/dev/sda) disk) into 2 equal size primary partitions. If using your disk from the lab, delete your partitions that you created (make sure you’re editing /dev/sdb) and start with a un-partitioned disk. You can use the lab instructions as a reference here, but you’ll need to use your own ingenuity to figure out the exact process. I strongly recommend that you write out the IOCTRL table after you create the first partition, then go back into fdisk to create the second. This will help to prevent any possible overlap in the partition address space. 3. Install filesystems onto your new partitions. The first partition (/dev/sdb1) should be ext3 and the second (/deb/sdb2) ext4 respectively. 4. Mount your partitions in the /mnt directory on a new directory titled your last name’ & ‘your last name’2 respectively. 5. Take a screenshot of the df -h command that shows your new disk devices mounted and ready for use. Upload the screenshot in PNG or JPG format by the due date for credit. Show transcribed image text This week, we’re going to add a hardware device to vCloud, then make that device ready for use. I’ve posted directions for doing this in the lab, but please note that the actual commands should be composed based on the information here. Don’t blindly cut/paste from the instructions or you will end up with the wrong settings. 1. Create a new disk drive in vCloud with a capacity of 16GB. Please do not make it any larger. If you’ve already done this for the lab, you can use this disk in vcloud (/dev/sdb) and can skip ahead to step 2. For this part you should follow the lab instructions exactly. If you are unsure of what to do here, please contact me and I’ll assist you. 2. Boot your CentOS instance. From a root account, use the ‘fdisk -l command to find your new partition. It should be named /dev/sdb. If this is not correct, please contact me. 3. Using the fdisk utility, partition your NEW disk (make sure you don’t over write your existing (/dev/sda) disk) into 2 equal size primary partitions. If using your disk from the lab, delete your partitions that you created (make sure you’re editing /dev/sdb) and start with a un-partitioned disk. You can use the lab instructions as a reference here, but you’ll need to use your own ingenuity to figure out the exact process. I strongly recommend that you write out the IOCTRL table after you create the first partition, then go back into fdisk to create the second. This will help to prevent any possible overlap in the partition address space. 3. Install filesystems onto your new partitions. The first partition (/dev/sdb1) should be ext3 and the second (/deb/sdb2) ext4 respectively. 4. Mount your partitions in the /mnt directory on a new directory titled your last name’ & ‘your last name’2 respectively. 5. Take a screenshot of the df -h command that shows your new disk devices mounted and ready for use. Upload the screenshot in PNG or JPG format by the due date for credit.
Expert Answer
Answer to This week, we’re going to add a hardware device to vCloud, then make that device ready for use. I’ve posted directions f…
Wergies 1571 Mer Print Notice Copy Code Glowscript Indents Copied Since Indentation Import Q43838839
wergies -15.7..1 for mer in print) Notice that when you copy this code to glowscript, the indents are not copied, since Indentation is very important in python, fix the indentation in the copied code after the line that be so that it looks similar to the provided code. Match the line of programming wyntax with the lettered statement describing the action of the syntax A Displays the sum of the energies (le, the total energy). Adds the value of energy to the running total Assigns an initial value to the running total. Loops through the energies and signs each item to energy succesively ARE=Energy BE) CHE D forening Incorrect. The 9/12 Show transcribed image text wergies -15.7..1 for mer in print) Notice that when you copy this code to glowscript, the indents are not copied, since Indentation is very important in python, fix the indentation in the copied code after the line that be so that it looks similar to the provided code. Match the line of programming wyntax with the lettered statement describing the action of the syntax A Displays the sum of the energies (le, the total energy). Adds the value of energy to the running total Assigns an initial value to the running total. Loops through the energies and signs each item to energy succesively ARE=Energy BE) CHE D forening Incorrect. The 9/12
Expert Answer
Answer to wergies -15.7..1 for mer in print) Notice that when you copy this code to glowscript, the indents are not copied, since …
Whats 2 Bit 2 2 Multiplexers Q43841380
whats a 2-bit 2:2 Multiplexers?
Expert Answer
Answer to whats a 2-bit 2:2 Multiplexers? …